In order to make the machine run normally and improve the machine time, the crusher should pay attention to the following matters when working:
(1) Before use, check the lubrication system, the broken area, correct the tension of the belt, and tighten all the screws.
(2) After starting the oil pump motor for 5-10 minutes, check the working situation of the lubrication system. When it works normally, the main motor can be turned on.
(3) The ore feeding can only be started after the crusher runs at no load for 1-2 minutes. Since the gyratory rock crusher is full of ore feeding, it is necessary to pay attention to whether the ore feeding situation is normal, especially for rocks with a lot of mud and high moisture. If the rock blocks the feeding port, it is necessary to check the mine discharge situation during operation, and it is not allowed to accumulate rocks in the space under the sealing system.
(4) When stopping normally, the ore feeding should be stopped first, and the main motor can only be stopped after all the rocks in the crusher are removed. After stopping the oil pump motor, check all parts of the stone crusher after stopping, and solve the problem immediately.